Before Use; Preparation; Battery Fitting / Replacement; Ratchet Head Fitting / Replacement - norbar NORTRONIC 43501 Operator's Manual

BEFORE USE

Preparation

IMPORTANT: IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER,
THE PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED.
WARNING:

Battery Fitting / Replacement

Battery +ve
NOTE: Insert positive battery terminal into handle cavity first. Rotate the end cap clockwise to
tighten and counter-clockwise to release.

Ratchet Head Fitting / Replacement

NOTE: All NorTronic
to a different spanner end fitting, depress the plunger on the ratchet head and pull to
release.
ALLOW THE NORTRONIC
TEMPERATURE/HUMIDITY BEFORE SWITCHING ON. WIPE OFF ANY
MOISTURE BEFORE USE.
®
tools are Torque Handles with a 16mm spigot. Should you wish to change
®
TO EQUALISE TO THE AMBIENT
Depress
End cap
5