Introduction; Safety - Tate SmartAire MZ Basic User & Installation Manual

Thank you for choosing a Tate Airflow product. Tate Airflow products are engineered to maximize the
efficiency of your data center air handling system. We would be interested in hearing any comments you may
have on this installation manual, product, or overall experience. Please call or e-mail our Technical Service
Department:
Phone: 410-799-4200
E-mail: TateInfo@Tateinc.com
 Wear personal protective equipment (PPE) as applicable during installation. PPE may include gloves,
safety eyeglasses, hardhats, or additional equipment depending on exact job site conditions.
 Do not leave the site unattended until the installation is complete.
 All work conducted on units should only be conducted by a trained professional.
 Modifying equipment other than in ways suggested and approved by Tate are not recommended or
supported and may damage equipment or cause harm.
 It is recommended that the on board battery pack is tested yearly to ensure proper function and
failsafe operation. (As described in the Troubleshooting Section.)
 It is recommended that the on board battery pack is replaced by a trained professional at least once
every five years to ensure proper function and failsafe operation.
 Batteries should be disposed of by an approved technician.
 Regulations vary for different countries, Dispose of in accordance with local regulations.
 Environmental Conditions:
 Ambient Operational & Storage conditions:
o Temperature (°c) : 5 to 45
o Relative humidity (%): 20 to 80
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT BATTERY TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS AND LOCAL
7510 Montevideo Road
Jessup, MD 20794
Tel (410)799-4200
User Installation Manual

INTRODUCTION

SAFETY

CAUTION
ACCORDANCES
r1.0-12/11/15
SmartAire_mzb_Installation.docx
®
SmartAire MZ Basic
© 2015 Tate Access Floors, Inc.
3 of 27