Tate SmartAire MZ Basic User & Installation Manual page 20

9. The user is presented with the following menu items:
a. Overview: A list of variables which can be configured as listed in the following table.
b. TCP/IP Upgrade: To upgrade the system firmware; this is only necessary to utilize if directed by Tate.
Uploading custom files may cause damage or harm to the SmartAire.
c. E-mail Configuration: Interface to configure email alerts for errors. The user can configure a custom
Gmail account to originate all alerts from. SmartAire MZ must have access non-firewalled access to
Smtp.Gmail.com and port 465 to function properly.
d. Network Configuration: Interface to configure Network connectivity. System can be configured in either
dynamic or static IP configuration. (Note, system can be hard reset back into DHCP by following reset
procedure on 26 in Factory Default Settings section of installation document.)
e. Administrator: Edit log in password for local units for additional network security. This should be
completed promptly after start up by the appropriate user for enhanced security.
f. Help: Additional topics for assistance.
10. Overview: A number of customizable variables are presented to the user the following table describes some of
these in greater detail. (highlighted cells are Read & Write) (Greyed Items are unavailable with SmartAire Basic):
7510 Montevideo Road
Jessup, MD 20794
Tel (410)799-4200
User Installation Manual
r1.0-12/11/15
SmartAire_mzb_Installation.docx
®
SmartAire MZ Basic
© 2015 Tate Access Floors, Inc.
20 of 27