What You Need To Know - MTS Systems Landmark 370 Series Product Information

Introduction
370 Axial-Torsional Load Frame with Electromagnetic Rotary Servo Motor
The axial-torsional load unit with electromagnetic rotary servo motor, combines an axial
l
actuator with a rotary servo motor to simultaneously apply axial and torsional forces to
specimens.

What you need to know

MTS Systems Corporation assumes that you know how to use your controller. For information about
performing any controller-related step in this manual's procedure, see the appropriate manual. You
are expected to know how to perform the following procedures:
Turn hydraulic pressure on and off.
l
Select a control mode.
l
Adjust the actuator position.
l
Zero a sensor signal.
l
32 MTS Landmark™ Tabletop Load Units - Product Information