Series 662 Force Transducers - MTS Systems Landmark 370 Series Product Information

Introduction

Series 662 Force Transducers

The force transducer commonly used with the axial-torsional tabletop Series 370 Load Unit is a Series
662 Force Transducer. There is no manual for the force transducer. The following table provides the
specifications for the force transducers.
Parameter
Capacity
Model 662.20HD-04
Model 662.20H-05
Maximum excitation input 15 V DC
Bridge resistance
Hysteresis
Nonlinearity
Temperature
Usable range
Compensated range
Output
Model Axial Load Capacity Axial-Torsional Load Capacity Thread Size
662.20H-04 15 kN
662.20H-05 25 kN
44
Specification
Axial-Torsional
15 kN (150 N·m)
25 kN (250 N·m)
350Ω Axial, 700Ω Torsional
0.15% of full scale
0.3% of full-scale axial, 0.15% of full-scale torsional
0.0036% of reading/°C (0.0020%/°F)
-46°C to 93°C (-50°F to 200°F)
21°C to 77°C (70°F to 170°F)
1.5 mV/V at full-scale load (662.20-04)
2 mV/V at full-scale load (662.20-05)
150 N·m
250 N· m
MTS Landmark™ Tabletop Load Units - Product Information
M8 x 1.25 mm
M10 x 1.50 mm