Change The Hsm Filter - MTS Systems Landmark 370 Series Product Information

Maintenance

Change the HSM Filter

The hydraulic service manifold filter needs to be changed periodically.
Caution:
Mixing different brands of hydraulic fluid can contaminate your system.
Contaminated hydraulic fluid can cause premature wear of the hydraulic components in your
system.
Do not mix different brands of hydraulic fluid. MTS Systems Corporation recommends using
Mobil DTE-25 or Shell Tellus 46 AW hydraulic fluid.
The filter element should be replaced whenever:
The indicator on the top of the filter housing is in the bypass position, which indicates a dirty
l
filter condition.
The hydraulic fluid in the hydraulic power unit is changed.
l
Replace the filter element with one of the same rating or better.
114
Component Identification
Item Description
1 Dirty Filter Indicator
2 Inlet Filter
MTS Landmark™ Tabletop Load Units - Product Information