Intended Use; Applications; Use And Operation Solely With The Following Machines; Documents Which Also Apply - EWM drive 4X IC D HP Operating Instructions Manual

Intended use

Applications

Intended use
3
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
•
The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
•
Do not improperly modify or convert the equipment!
3.1 Applications
Wire feeder to feed wire electrodes for gas-shielded metal-arc welding.
Machine series
alpha Q puls MM
Phoenix puls MM
Taurus Synergic S MM
 possible
 not possible
3.2

Use and operation solely with the following machines

A suitable power source (system component) is required in order to operate the wire feed unit!
For machine variants with wheel spacers only!
The following system components can be combined with this machine:
•
alpha Q Expert 2.0 puls MM
•
alpha Q Progress puls MM
•
Phoenix Expert 2.0 puls MM
•
Phoenix Progress puls MM
•
Taurus Synergic S MM
Power sources must have the MM identifier for MULTIMATRIX technology in their model
designation.
3.3

Documents which also apply

3.3.1

Warranty

For more information refer to the "Warranty registration" brochure supplied and our information regarding
warranty, maintenance and testing at www.ewm-group.com!
10
WARNING
Main process
Standard MIG/MAG
welding
   
   
   
Pulsed MIG/MAG welding
  
  
  
Secondary
process
  
  
  
099-005507-EW501
13.09.2018