Intended Use; Applications; Forcearc; Rootarc - EWM Taurus Synergic drive 200C Operating Instructions Manual

Intended use

Applications

3 Intended use
This machine has been manufactured according to the latest developments in technology and current
regulations and standards. It must only be operated in line with the instructions on correct usage.
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not used
correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!
3.1 Applications
3.1.1

forceArc

Welding with a powerful forced arc, deep fusion penetration and virtually spatter-free weld seams of the
highest quality.
3.1.2

rootArc

Stable, soft, short arc even with long welding leads; ideal for simple, reliable root welding without pool
support, easy gap bridging.
3.1.3

MIG/MAG standard welding

Metal arc welding using a wire electrode whereby gas from an external source surrounds the arc and the
molten pool to protect them from the atmosphere.
3.1.4

MIG/MAG cored wire welding

Welding with cored wire electrodes consisting of a metal casing and a powder core.
As with MIG/MAG standard welding, the arc is protected from the atmosphere by shielding gas. The gas
is supplied either externally (gas shielded cored wires) or produced in the arc by means of the powder
core (self-shielding cored wires).
3.1.5

TIG (Liftarc) welding

TIG welding process with arc ignition by means of workpiece contact.
3.2

Use and operation solely with the following machines

A suitable power source (system component) is required in order to operate the wire
feed unit!
Taurus 301 Synergic
Taurus 351 Synergic
Taurus 451 Synergic
Taurus 551 Synergic
12
WARNING
NOTE
Taurus Synergic Taurus Synergic
drive 4L
Taurus Synergic
drive 4 drive 200C
Taurus Synergic
drive 300C
099-005211-EW501
23.08.2010