Installing The Manifold; Installing The Harness - Air Lift WirelessONE 25870 Installation Manual

WirelessONE

INSTALLING THE MANIFOLD

IF THE USER INSTALLS THE MANIFOLD OR COMPRESSOR IN THE CAB OF THE
WARNING
VEHICLE IN EXTREME WEATHER CLIMATES, DO NOT USE ANY ANTI-FREEZE
PRODUCT IN THE SYSTEM AS EXHAUST FUMES CAN BE TOXIC. CARE MUST BE
TAKEN WHEN USING THIS PRODUCT! IT IS RECOMMENDED THAT THIS PRODUCT'S
MSDS SHEET BE REVIEWED BEFORE USE! THIS CAN BE OBTAINED WHERE YOU
PURCHASED THIS PRODUCT.
1. Select a rigid mounting location for the manifold on the vehicles frame or crossmember
2. Use mounting bracket 11027 (R) to secure to the rigid mounting surface with a 17173

INSTALLING THE HARNESS

MN-751
that shields the manifold from the elements and heat sources (fig. 4).
fastener (S). The manifold should not be the lowest point in the pneumatic system.
fig. 5
fig. 4
7