Advertisement
CLICK!
44
g
REMOvING tHE cOvER
The cover consists of 6 parts: 1 shell cover, 1 headrest
cover, 2 shoulder pads, 1 new-born inlay and 1 belt
buckle pad. To remove, please apply the following
procedure:
• Undo the belt buckle.
• Remove the new-born inlay.
• Remove both shoulder pads from the belt.
• Undo both pressbuttons, which are located between
headrest cover and shell cover and pull the headrest
cover over the headrest without damaging the
protective foams underneath.
• Thread the shoulder belts with the buckle tongues out
of the headrest cover.
• Undo both double-press buttons on both sides of the
sun canopy.
• Undo three press buttons on the backside of the shell
underneath the sun canopy.
• gently pull out the shell cover around the shell edging.
• Pull the seat buckle through the cover
• now you can remove the cover
Advertisement
Chapters
