Backing Up And Restoring Bootware; Backing Up The Entire Bootware - H3C S3600 Series Installation Manual

<Sysname> delete startup.cfg
Delete flash:/startup.cfg?[Y/N]:y
%Delete file flash:/startup.cfg...Done.
Now, the file test.txt is moved to the recycle bin. If you want to restore the file, you can use the undelete
command.
# Restore the file test.txt from the recycle bin.
<Sysname> undelete test.txt
Undelete flash:/test.txt? [Y/N]:y
% Undeleted file flash:/test.txt.
For details about the delete and undelete commands, refer to H3C S3600 Series EPON OLT Switches
Command Manual.

Backing Up and Restoring BootWare

You can back up and restore BootWare on the BootWare operation sub-menu.
Select 7 on the main menu to enter the BootWare operation sub-menu. Refer to
Sub-menu on page

Backing Up the Entire BootWare

To back up the entire BootWare, you need to back up the basic segment and then the extended
segment of the BootWare.
Select 1 on the BootWare operation sub-menu, and the system prompts:
Will you backup the Basic BootWare? [Y/N]
Enter Y:
Begin to backup the Basic BootWare....................Done!
At this moment, backup for the basic segment is finished.
The system continues to prompt:
Will you backup the Extend BootWare? [Y/N]
Enter Y:
Begin to backup the Extend BootWare.................. Done!.
At this moment, backup for the extended segment is finished.
Both the basic and extended segments of the BootWare are backed up to the Flash.
5-8 for details.
5-27
BootWare Operation