H3C S3600 Series Installation Manual page 54

# Add FTP username and password.
[Sysname] local-user guest
[Sysname-luser-guest] service-type ftp
[Sysname-luser-guest] password simple 123456
[Sysname-luser-guest] authorization-attribute level 3
Table 5-11 Description on the display information of enabling the FTP service
Display information
ftp server enable
local-user guest
service-type ftp
password simple 123456
authorization-attribute level 3
The FTP service is enabled after the authentication and authorization of the FTP server are
configured. The FTP server supports multi-client access. A remote FTP client sends a request to
the FTP server. The FTP server executes an action accordingly and returns the execution result to
the client.
After you configure the FTP server authentication and authorization, you need to set the user level
to 3. Otherwise, when you restore the backed-up file to the switch, the system will prompt that "You
have no rights to store files". For configurations of user levels, refer to H3C S3600 Series EPON
OLT Switches Operation Manual..
Step3 Enable the FTP client program on the PC.
In the following example, the FTP client program is the built-in Windows XP FTP client:
Enter ftp in the DOS window:
C:\Documents and Settings\Administrator>ftp
ftp>
ftp> open 192.168.80.10
Connected to 192.168.80.10.
220 FTP service ready.
User (192.168.80.10:(none)): guest
331 Password required for guest
Password:
230 User logged in.
Table 5-12 Description on the display information of enabling FTP server
Display information
C:\Documents and Settings\Administrator>ftp
ftp> open 192.168.80.10
Description
Enable the FTP server function.
Create a local user, and enter user view.
Set the service type that can be used locally to FTP.
Configure the user password.
Set the user level to 3.
Enable the FTP client program on the PC.
In FTP client view, log into the IPv4 FTP server.
5-22
Description