H3C S3600 Series Installation Manual page 53

# Upload file main.app on the switch to the server, and save it as main.app.
[ftp] put main.app main.app
227 Entering passive mode (192,168,80,200,5,34)
125 Using existing data connection
226 Closing data connection; File transfer successful.
FTP: 10867848 byte(s) sent in 172.505 second(s), 63.00Kbyte(s)/sec
[ftp] quit
221 Service closing control connection
When you back up an application file, if a file having the same name with the file to be backed up
exists on the server, the system overwrites the file on the server directly.
For details about the put command, refer to H3C S3600 Series EPON OLT Switches Operation
Manual.
You can back up a configuration file in the way you back up an application file.
Table 5-10 Description on the information displayed when you update and back up an application file
on the switch
Display information
[ftp]get main.app main.app
flash:/main.app has been existing. Overwrite it?
[Y/N]:y
FTP: 10867848 byte(s) received in 472.515
second(s), 23.00K byte(s)/sec
[ftp]put main.app main.app
FTP: 4722 byte(s) sent in 0.074 second(s),
63.00Kbyte(s)/sec
[ftp]quit
221 Service closing control connection
Switch serving as the FTP server and PC serving as the FTP client
Step1 Set up an FTP updating environment.
Connect the Ethernet interface on the switch to the PC using a crossover Ethernet cable.
Configure the IP addresses of the server and the PC to be on the same network segment. Ensure
the connectivity between the switch and the PC. In this example, the IP address of the
Vlan-interface1 is 192.168.80.10, and that of the PC is 192.168.80.200.
You can use the ping command to check whether the connection is successful.
Step2 Enable the FTP service.
# Enable FTP server.
[Sysname] ftp server enable
Download the file used for updating.
The system prompts whether to overwrite the
existing file.
Download and updating of the application file is
finished.
Upload the file from the switch to the PC.
Upload and backup of the application file is
finished.
Quit FTP client view.
Close the service control connection.
5-21
Description