Updating And Backing Up An Application Using Tftp At The Cli - H3C S3600 Series Installation Manual
Epon olt switches
Hide thumbs
Also See for S3600 Series:
- Command manual (1277 pages) ,
- Operation manual (966 pages) ,
- Installation manual (98 pages)
Table of Contents
Advertisement
To use the default parameter after the colon, press Enter directly.
Step3 After the above configuration, the system will automatically return to the Ethernet parameter set
sub-menu, where you can select 2 to update the main application file.
Loading............................... .... done
10129712 bytes downloaded!
Updating File flash:/main.app
.........
Update Success!
Step4 After the updating is finished, select 0 to return to the main menu, where you can select 1 to reboot the
system from the flash.
If the input application file name already exists on the flash memory, the system prompts "The file is
exist, will you recover it? [Y/N]". If you enter Y, the input application file will overwrite the one on the
flash memory. The updated application file will directly replace the existing one of this type and
become the only application file.
Make sure the available space on the flash memory is sufficient. Or, the system prompts "The free
space isn't enough!"
Refer to
Overview
Updating and Backing Up an Application Using TFTP at the CLI
Step1 Set up a TFTP updating environment.
Switch serves as the TFTP client, and PC serves as the TFTP server.
For the procedure of setting up updating environment, refer to
on the BootWare Menu
Run the terminal emulation program on the PC, and then configure the IP addresses of the client
and sever to be on the same network segment. Ensure the connectivity between the switch and the
PC. In this example, the IP address of the management Ethernet interface is 192.168.80.10, and
that of the PC is 192.168.80.200.
You can use the ping command to check whether the connection is successful.
Step2 View the files saved on the storage medium and its available space.
Use the dir command on the console terminal to view the files contained in the current file system, and
the available space of the storage device.
<Sysname> dir
Directory of flash:/
0
-rw-
1
-rw-
on page
5-1
for detailed descriptions on file types.
on page 5-15.
9342824
Aug 08 2008 20:00:00
697
Apr 26 2000 12:14:12
Updating an Application Using TFTP
s3600-2p-olt.app
startup.cfg
5-17
Advertisement
Table of Contents
