H3C S3600 Series Installation Manual page 17

Figure 3-1 Appearance of a standard front mounting ear
(1)
(2)
(1) Screw hole used to fix the mounting ear to the cabinet (Use one M6 screw)
(2) Screw hole used to fix the switch to the mounting ear
Use front mounting ears to install a switch
Follow these steps to mount a switch into a 19-inch standard cabinet:
1) Wear an ESD-preventive wrist strap to check the grounding and stability of the cabinet.
2) Take out the screws which are packed together with the front mounting ears, and fix one end of
mounting ears to the switch, as shown in
Figure 3-2 Fix front mounting ears (1)
3) Place the switch horizontally in a proper position, and fix the other end of mounting ears to the front
brackets with screws and captive nuts, as shown in
Figure 3-2.
Figure 3-3.
3-2