I/O Devices Page - FLIR Saros DM Series Installation And User Manual

Configuration
4.6

I/O Devices Page

The I/O Devices page provides configuration settings for external I/O connections and the device managing
those connections with the camera.
The following settings for the device managing the external I/O connections are available:
·
Enabled or Disabled
·
Device IP address and port
·
Input and output base addresses
You can define the number of input and output pins the device manages.
The following information appears for each pin:
·
I/O pin number
·
Type—Input or Output
·
State—the pin's current state: Open or Closed
For each pin, you can define the following:
·
Idle State—Open or Closed
·
Alarm Auto Ack—Yes or No
·
Enabled—Yes or No
·
Reset Interval (for output pins only)—between 0-600 seconds; specifying 0 seconds disables the auto
reset
Related Operation and Configuration Information
For information about changing the current state of the input and output pins, see
For more information about how to configure the device managing the external I/O connections, refer to the
device's documentation.
427-0200-00-12 Revision 100 November 2019
This document does not contain any export-controlled information.
I/O Page.
40