Operation; Accessing The Camera - FLIR Saros DM Series Installation And User Manual

Operation

3 Operation
This chapter includes information about how to
Settings page.
3.1

Accessing the Camera

To operate the camera, you first need to access it. You can access the camera by logging in to the
camera's web page.
To log in to the camera's web page:
1. Do one of the following:
In the FLIR Discovery Network Assistant (DNA) tool, double-click the camera in the Discover List.
o
The DNA tool does not require a license to use and is a free download from the product's web
page on FLIR.com. Download the DNA tool; unzip the file; and then double-click
(DNA.exe). The Discover List appears, showing compatible devices on the VLAN.
Type the camera's IP address in a browser's address bar (when the PC and the camera are on
o
the same network). If you do not know the camera's IP address, you can use the DNA tool to
discover it.
2. On the login screen, type a user name and the password.
When logging in to the camera for the first time or for the first time after
resetting the camera to its factory defaults, type admin for the user
name and for the password.
If you do not know the user name or password, contact the person who
configured the camera's users and passwords.
3. When logging in to the camera for the first time or for the first time after
resetting the camera to its factory defaults, specify a new password for
the admin user and then log back in using the new password.
Use a strong password consisting of at least 12 characters and at least
one uppercase letter, one lowercase letter, and one number.
Passwords can include the following special characters: |
@#~!$&<>+_-.,*?= .
The camera's View Settings home page
427-0200-00-12 Revision 100
access the camera
appears.
November 2019
This document does not contain any export-controlled information.
and how to operate it using the View
to run the tool
22