FLIR Saros DM Series Installation And User Manual page 21

Installation
Step 1
For installation with CX-ELBX-G3
wall mount bracket with power
box or CX-GSNK-G3 gooseneck
mount with power box, screw
power box onto CX-POLE-G3.
Step 3
Fasten hoops tightly with flat-
head screwdriver.
Detailed instructions for mounting a camera using the CX-POLE-G3 pole adapter with the
CX-ARMX-G3 wall mount bracket
1. Fasten the CX-POLE-G3 pole adapter to a pole with the supplied stainless straps, as described above.
2. Thread the cables through the pole adapter.
3. Attach the wall mount bracket to the pole adapter using the supplied screws and washers.
4. Thread the cables through the wall mount bracket with the cables coming out of the pendant mount's
outlet. For outdoor cameras, attach the waterproof gasket to the pendant mount.
5. After threading the cables, block the entry hole with the supplied sponge to prevent insects from
entering. The sponge can be placed in one of two ways.
427-0200-00-12 Revision 100
For installation with CX-ARMX-
G3 wall mount bracket, screw wall
mount bracket onto CX-POLE-
G3.
November 2019
This document does not contain any export-controlled information.
Step 2
Thread the hoops through the
CX-POLE-G3.
16