Thermal Image Setup - Thermal Page - FLIR Saros DM Series Installation And User Manual

Operation
view where movement is present. However, it is less precise than 3D noise reduction. It can be set On
or Off.
·
Video Format—When mounted indoors, the visible camera shutter speed can be
synchronized to the 50 Hz or 60 Hz power used for lighting the scene. If lighting is
connected to 50 Hz power, the PAL setting might provide better video and NTSC
might provide better video under 60 Hz lighting.
Where relevant, changing the settings immediately affects the live visible video images and streams. To
save any changes, click Save. To discard changes or return to the factory defaults, click Reset.
3.2.3

Thermal Image Setup - Thermal Page

In most installations, it is not necessary to change the default settings of the thermal sensor. However, in
some situations, depending on weather, time of day, or scene, modifying one or more parameters can
improve the video stream image. Be aware that, when the conditions change, the parameters might need to
be adjusted again. It is also a good idea to know how to restore the factory default settings (see
& Info Page).
AGC ROI
The camera's Automatic Gain Control (AGC) algorithm adjusts the thermal video according to the region of
interest (ROI). By default, the ROI is Full screen; the camera's AGC algorithm considers the entire image.
In some cases, defining an ROI that excludes a portion of the screen can improve the image. For example,
the sky is generally very cold. Defining the ROI to exclude the sky might improve contrast in the rest of the
image.
427-0200-00-12 Revision 100 November 2019
This document does not contain any export-controlled information.
Firmware
29