FLIR Saros DM Series Installation And User Manual page 25

Installation
3. Configure the camera's networking settings.
Right-click the camera and select IP
Setup, or click the IP Setup icon in
the navigation bar.
In the DNA - IP Setup window, you
can clear Use DHCP and manually
specify the camera's IP address,
Mask, and Gateway.
Then, click Update and wait for
Ok status to appear.
To configure the camera for networking using the camera's web page:
1. Open the camera's web page either by double-clicking the camera in the DNA Discover List or by
typing the camera's IP address in a web browser's address bar. The camera's web page supports the
latest versions of popular web browsers.
2. On the login screen, type admin for the user
name and the password for the admin user
(default: admin).
When logging in to the camera for the first time or for the first time after performing a factory default,
specify a new password for the admin user. Use a strong password consisting of at least 12 characters
and at least one uppercase letter, one lowercase letter, and one number. Passwords can include the
following special characters: |@#~!$&<>+_-.,*?= .
Log back in with the new password.
427-0200-00-12 Revision 100 November 2019
This document does not contain any export-controlled information.
20