FLIR Saros DM Series Installation And User Manual page 24

Installation
To configure the camera for networking using the DNA tool:
1. Run the DNA tool (DNA.exe) by double-clicking
devices on the VLAN and their current IP addresses.
2. Authenticate the camera.
Right-click the camera and select
Login, or click the Login icon in the
navigation bar.
In the DNA - Login window, type the
password for the admin user (default:
admin). Then, click Login.
In the DNA Discover List, verify that the camera's status is Online and Authenticated.
427-0200-00-12 Revision 100
. The Discover List appears, showing compatible
November 2019
This document does not contain any export-controlled information.
19