Fuel - McConnel ROBOCUT RC28 Operator's Manual

FUEL

Fuel Type: standard unleaded motor vehicle petrol.
Fuel Capacity: 20 litres (2x10 litre removable fuel tanks).
Only fuel the machine on a level well-ventilated site away from sources of sparks,
flames or heat. Machine power must be SHUT-OFF (machine E-Stop activated).
It is advisable to fuel the machine at the start of the working day when the engine is cold.
If fuel replenishment is required during work; always switch the engine off and allow the
engine and exhaust to cool to a safe temperature before removing fuel tanks.
Fill fuel tanks at a safe distance from the machine to reduce the risk of fire; always fit tank
caps when carrying or transporting fuel tanks, even if they are empty.
When replacing the tanks on the machine ensure the caps are replaced correctly and all
fuel connections are tight. If caps or connections are damaged they must be replaced
before using the machine.
Fixed braces on the underside of the engine cover secure the fuel tanks in position when
the cover is closed. Never attempt to operate the machine with the engine cover open or
raised.
Feeder Fuel Tank
Fuel Tank Cap
Connection
Engine cover must be shut and secured at all times when using machine.
Refuelling must only be performed with engine switched off and in a
cooled down condition. Never refuel the machine when the engine is hot.
Tank Cap
(Carrying)
Fuel Tank Cap
Connection
Tank Cap
(Carrying)
25
Primary Fuel Tank