Cutting Deck; Cutting Height; Cutting Height Pre-Set; Activating Pre-Set Cutting Height - McConnel ROBOCUT RC28 Operator's Manual

CUTTING DECK

Cutting Height

The machine can be set to cut at any height between 25mm and 175mm.
The cutting height selected should be one that offers the desired finish. If the material
being cut is particularly tall or thick or causes the machine to 'labour' whilst working, it is
advisable to begin cutting at a high setting and progressively reduce the height until the
required finish is achieved.

Cutting Height Pre-set

The controls feature a 'pre-set' height setting allowing the user to set a default cutting
height that the machine automatically returns to when the deck control joystick is operated
forwards for 2 seconds and released.
Setting the Pre-set Cutting Height
The procedure for setting the pre-set height is as follows:
With machine running, press OPT button on control unit to display screen #2.
OPT
Screen #1 Screen #2 Set required pre-set height using joystick.
Current pre-set height Pre-set height required
When required pre-set height is displayed, press OPT button to return to screen #1.
The pre-set cutting height has now been set at your chosen height and will remain as that
setting until it is subsequently changed.

Activating Pre-set Cutting Height

To move the deck to the pre-set cutting height, push the right-hand joystick forwards for 2
seconds and release; the deck will then automatically move to the pre-set height.
To move the deck to a different cutting height use continual operation of the joystick to
move the deck to the required height.
19