Machine Delivery - McConnel ROBOCUT RC28 Operator's Manual

MACHINE DELIVERY

Robocut RC28 machines are delivered ready for use pre-filled with all the necessary
lubricants and fluids other than fuel. Before use, all delivery packaging should be removed
and the machine fully inspected; if there are any signs of damage or missing components
it must be reported to your supplier/dealer immediately.
Standard items supplied;
 Machine with mounted receiver.
 Remote Control Transmitter Unit c/w Battery Pack.
 Reserve Battery Pack.
 Battery Charger.
 Belt for Remote Control Unit.
 User Manual.
Machine Handling
The machine is equipped with 4 lifting points for raising the machine with overhead lifting
gear. Ensure the equipment used does not foul or come into contact with the machines
body panels during the lifting procedure; use spreader beams if required.
Lifting Point Locations
Lifting Equipment
Suitable overhead lifting equipment with a minimum Safe Working Load (SWL) in excess
of 500kg should be used for handling the machine.
Ensure the machine is kept balanced and level at all times during the lifting procedure.
All operatives and bystanders must remain at a safe distance from the raised machine.
Machine Transportation
The lifting points on the machine can also be used as lash points; these positions should
be used to secure the machine for transportation on flatbed vehicles or trailers.
Keep all persons at a safe distance from the raised machine.
Lifting of the machine should only be performed on a firm level site.
Machine must be fully secured at all times when transporting on a vehicle.
8