Driving & Manouevering; Forwards & Backwards Travel; Steering Direction - McConnel ROBOCUT RC28 Operator's Manual

DRIVING & MANOUEVERING
Operation of the machine must only be performed by a responsible person who has read the
manual and is familiar with the machine's controls and all aspects relating to the safe use of
e that all new operators practice using the machine, without the rotors running,
It is advisabl
in a safe open area to familiarise themselves with the controls and movements of the machine.
Forwards & Backwards Travel
Operation of the machine's forward and backwards movements
are controlled by the left-hand joystick on the remote controls;
Push the lever forwards to move the machine forwards.
Pull the lever backwards to move the machine backwards.
The joystick operates proportionally; the further the lever is moved the
faster the machine travels.
The maximum speed available will be determined by the particular
position of the track speed dial.
Turn dial anti-clockwise = reduces top speed limit
Turn dial clockwise = increases top speed limit

Steering Direction

Operation of the machine's left and right movements can be controlled using either the
left-hand or right-hand joystick on the remote controls;
Move left-hand OR right-hand lever to the left to steer left.
Move left-hand OR right-hand lever to the right to steer right.
STEER
LEFT
NOTE: if joysticks are operated in opposing directions simultaneously the RH joystick will take priority.
this equipment.
STEER STEER
RIGHT LEFT
17
FORWARD
TRAVEL
REVERSE
TRAVEL
STEER
RIGHT