Steering Bias; Cutting Height Control - McConnel ROBOCUT RC28 Operator's Manual

Steering Bias

The steering bias feature allows the operator to set a 'degree of steer' for manoeuvring the
machine across slopes, setting and adjustment is performed using the steering bias dial;
Turn control dial to the left to select a desired degree of left steering bias.
Turn control dial to the right to select a desired degree of right steering bias.
Place control dial into the central position to de-select steering bias.
The further the dial is rotated in each direction the greater the degree of bias.
Operating with Bias
Steering will still need to be monitored and controlled by the operator in the normal manner
but steering corrections required to guide the machine will be greatly reduced.
Bias Control
Left Bias

Cutting Height Control

The deck height is controlled by forward and backwards operation of
the right-hand joystick;
Move joystick forwards to lower the cutting height.
Move joystick backwards to raise the cutting height.
Providing it is safe to do so, the cutting height may be adjusted whilst
the machine is in motion.
No Bias
18
Right Bias
DECK
DOWN
DECK
UP