Settings For The Ladder Logic Program Examples - Allen-Bradley 1203 Series User Manual

1
Settings for the Ladder Logic
Program Examples
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Figure 4.2 illustrates the first scan in Example Application 3.
Figure 4.2
Remote I/O
Controller
Image
Output Image
1
O:010 = 27
1
O:011 = 123
O:012 = 27
O:013
O:014
O:015
O:016
O:017
Input Image
I:010 = 27
I:011 = 123
I:012
I:013
I:014
I:015
I:016
I:017
In this example scan, the parameter being changed is P27-[Preset Freq 1]. Its new value will be 123.
The example ladder logic programs in this manual use the following
settings.
Remote I/O Communications Module Settings
The Remote I/O module used for examples in this manual is
connected to a 1336 PLUS drive. It is configured for the following:
• Rack Address = 2
• Rack Size = 1/2 Rack
• Starting Group = 0
DIP switches on SW3 are set as follows:
Switch
Creating Ladder Logic Programs
Example Scan using Datalinks
SCANport
Remote I/O
Communications
Module
Block Transfer
Logic Command
Reference
Datalink A1
Datalink A2
Datalink B1
Datalink B2
Datalink C1
Datalink C2
Datalink D1
Datalink D2
Block Transfer
Logic Status
Feedback
Datalink A1
Datalink A2
Datalink B1
Datalink B2
Datalink C1
Datalink C2
Datalink D1
Datalink D2
Settings
8 ---> 1 Description
00001110 Logic command/status, reference/
feedback, and datalink A are enabled. All
Off = 0
other features are disabled.
On = 1
4–5
1336 PLUS Drive
Message Handler
Logic Command
Reference
P111 (Data In A1) = Sends "27" to P112
P112 (Data In A2) = Sends "123" to P27
P113 (Data In B1) = Sends "27" to P120
P114 (Data In B2)
P115 (Data In C1)
P116 (Data In C2)
P117 (Data In D1)
P118 (Data In D2)
Message Handler
Logic Status
Feedback
P119 (Data Out A1) = Gets "27" from P112
P120 (Data Out A2) = Gets "123" from P27
P121 (Data Out B1)
P122 (Data Out B2)
P123 (Data Out C1)
P124 (Data Out C2)
P125 (Data Out D1)
P126 (Data Out D2)