Appendix Objectives; 1336-Gm1 Board Specifications - Allen-Bradley 1203 Series User Manual

Appendix Objectives

1336-GM1 Board Specifications

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Specifications
Appendix A provides the specifications for the 1203-GD1 module,
1203-GK1 module, and the 1336-GM1 board.
Important: Remote I/O communications modules are non-repairable
units.
The following table gives the specifications for the 1336-GM1 board.
Category
Electrical Input Voltage
Input Current
Input Frequency
SCANport Load
Environmental Operating Temperature
Storage Temperature
Relative Humidity
Communications Product
Controller
Baud Rates
Rack Sizes
Mechanical Height
Width
Depth
Enclosure
Regulatory UL
Agencies
CSA
CE
ATTENTION: The 1336-GM1 communications board
!
contains ESD (Electrostatic Discharge) sensitive parts.
Static control precautions are required when installing
and removing this assembly. Device malfunction may
occur if you do not follow ESD control procedures. If
you are not familiar with static control procedures, refer
to Rockwell Automation Publication 8000-4.5.2,
Guarding Against Electrostatic Damage, or other appli-
cable ESD protection handbook.
Appendix
Specifications
Supplied by the drive
Not Applicable
Not Applicable
60mA DC
0 to +50°C (32 to 122°F)
–40 to +85°C (–40 to 185°F)
0 – 95%, non-condensing
SCANport
Allen-Bradley Remote I/O
57.6K, 115.2K, 230.4K
1/4, 1/2, 3/4, full
71 mm (2.8")
114 mm (4.5")
127 mm (0.5")
Open (IP00)
A