Demo Function; Output Resolution - NTI SPLITMUX Series Installation And Operation Manual

SCENE Load method:
Press the SCENE button (the button light goes ON), then press button 1 - 9 for load and
exit.
Demo Function：
Demo mode: 5 - 9 as multi-view window will be auto-switching by
sequence. Set as indicated below:
Press the SCENE button (the button light goes ON), press the SWITCHER button to turn
on the DEMO mode. Press the SCENE button again to leave DEMO mode.

Output Resolution:

Press button 1 and power ON, output resolution is 720p@60Hz.
Press button 2 and power ON, output resolution is 1080p@60Hz.
IR Remote Control Function:
This device could use IR remote control for function setting and control. The ID number must be setup before
using the IR remote control or changing the batteries. Setup the IR remote ID number: Press and
hold"Power" button on the IR remote control and press number "0".
Button
1
2
3
4
5
6
7
8
9
0
A
B
＊
、▲ 、▼ 、◀ 、▶ 、＃、MENU、ENTER: Reserved
same as panel button 1
same as panel button 2
same as panel button 3
same as panel button 4
same as panel button 5
same as panel button 6
same as panel button 7
same as panel button 8
same as panel button 9
same as panel SWITCHER
same as panel AUDIO
same as panel SCENE
SCENE save setting: B → ＊ → 1 ~ 9
Function
4