Overview Of Parameters - oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer

6

Overview of parameters

Abbreviation Description
∆T absolute
Afterheating temperature in the afterheating mode "Absolute"
∆T sliding
Temperature difference for the sliding adaptation of the hot water set temperature
∆T relative
Afterheating temperature in the afterheating mode "Relative"
∆T circ
Temperature loss of the circulation pipe
∆t circ
Time constant of the circulation pipe
∆Tmax
Maximum exceedance of the hot water set temperature
Fct.block Function block
Boiler max. Maximum afterheating temperature of the boiler
AH Afterheating
Return Return
T-circ therm Switch-on/-off temperature for the thermal circulation
T-disinf set Set temperature for the thermal disinfection
T-AH on Switch-on temperature for the afterheating
T-store flow Store flow temperature
T-HP opt Optimum operating temperature of the heat pump
T-HW Hot water flow temperature
T-HW set Hot water set temperature
Sliding adaptation of the hot water set temperature
T-HW set sl.
Flow Flow
HP Heat pump (function)
38