Hot Water; Circulation; Afterheating; Disinfection - oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer

3.2.2 Hot water

In the Status / Hot water menu, the status of the
DHW heating is indicated.

3.2.3 Circulation

In the Status / Circulation menu, the status of the
circulation, the circulation mode selected as well as,
if applicable, remaining runtimes and blocking times
are indicated.

3.2.4 Afterheating

In the Status / Afterheating menu, the status of
the afterheating as well as the afterheating mode se-
lected are indicated.
16

3.2.5 Disinfection

In the Status / Disinfection menu, the status and
the progression of the thermal disinfection, different
runtimes as well as the number of starting processes
are indicated.

3.2.6 Additional functions

In this position, status menus for additional functions
appear, if additional functions have been activated.
The menu items appear with the name of the cor-
responding function:
• Fct. block 1
• Fct. block 2
• Stratifi ed return
• Error relay
In the corresponding menu, status values of the se-
lected function are indicated.

3.2.7 Messages

In the Status / Messages menu, error and warning
messages are indicated.
During normal operation, the message Everything
OK is indicated.
A line break or short circuit in a sensor line is in-
dicated as ! Sensor fault. A precise error code can
be found in the Status / Meas.- / Balance values
menu.
In the case of an error, the LED of the directional
pad fl ashes red.

3.2.8 Service

In the Status / Service menu, each sensor and relay
is indicated with the component or function it has
been allocated to.
Relays and sensor inputs that are not used will not
be indicated here.