Adjusting The Timer - oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer

2.2.3 Adjusting the timer

When the Timer option is activated, a timer is in-
dicated in which time frames for the function can be
adjusted.
First of all, an overview of the current adjustments
is displayed. For each day of the week there is an
overview display. The display can be switched back
and forth between the different days by pressing but-
tons ❷ or ❹.
In order to adjust the timer, press button ➄.
First the individual days of the week or all days of the
week can be selected.
The last menu item after the list of days is Continue.
If Continue is selected, the Edit timer menu opens,
in which the time frames can be adjusted.
10
Adding a time frame:
The time frames can be adjusted in steps of 15 min-
utes.
In order to add an active time frame, proceed as fol-
lows:
Î Move the cursor to the desired starting point of
the time frame by pressing buttons ❷ and ❹.
Confi rm the starting point of the time frame by
pressing button ❶.
Î Move the cursor to the desired ending point of
the time frame by pressing buttons ❷ and ❹.
Î The end of a time frame can be determined by
pressing button ➄.
Î In order to add another time frame, repeat the
last three steps.
Note:
In order to adjust a 24 h time frame, press
button ❶ once during the adjustment pro-
cess.
Î In order to get back to the overview of current
adjustments, press button ➄ again.