Basic Settings; Sd Card - oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer

3.5

Basic settings

In the Basic settings menu, all basic parameters for
the controller can be adjusted. Normally, these set-
tings have been made during commissioning. They can
be subsequently changed in this menu.
Basic settings
Adjustment channel Description
Language Selection of the menu language
Auto DST Automatic daylight saving time
adjustment
Date Adjustment of the current date
Time Adjustment of the current time
T-display standby Display illumination time
Factory setting back to the factory settings
back
32
Reset
By means of the reset function, all adjustments can be
set back to their factory settings.
All adjustments that have previously been made will
be lost! For this reason, a security enquiry will appear
after the reset function has been selected.
Only confi rm the security enquiry if you are sure you
want to set back all adjustment to the factory setting.
Adjustment range / selection
Deutsch, English, Francais,
Espanol, Italiano, České,
Русский
Yes, No
01.01.2001 ... 31.12.2099
00:00 ... 23:59
10 ... 300 s
Yes, No
3.6

SD card

The controller is equipped with an SD card slot for
SD memory cards.
With an SD card, the following functions can be car-
ried out:
• Logging measurement and balance values in the
csv format. After the transfer to a computer, the
values can be opened and visualised, e. g. in a
Factory setting
spreadsheet.
Deutsch
• Store adjustments and parameterisations on the
SD card and, if necessary, retrieve them from
there.
Yes
• Running fi rmware updates on the controller.
01.01.2010
Firmware updates
- When an SD card with a fi rmware update is inserted,
the enquiry Update? is indicated on the display.
30 s
The setting can be changed between Yes and No by
No
pressing buttons ❷ and ❹.
Î To run the update, select Yes and confi rm by
pressing button ➄.
The update is run automatically. The indication
Please wait and a progress bar appear on the
display. When the update has been completed, the
controller will automatically reboot and run a short
initialisation phase.
Î To skip the update, select No.
The controller starts normal operation.