User Code; Inputs - oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer

3.8

User code

In the User code menu, a user code can be entered.
Each number of the 4-digit code must be individually
adjusted and confi rmed. After the last digit has been
confi rmed, the menu automatically jumps to the su-
perior menu level.
To access the menu areas of the expert level, the
expert user code must be entered:
Expert user code: 2962
Note:
For safety reasons, the user code should
generally be set to the customer code be-
fore the controller is handed to the cus-
tomer!
Customer user code: 0000
3.9

Inputs

In the Inputs menu, sensor offsets can be adjusted.
Inputs
Adjustment channel Description
Offset S1 ... S8 Sensor offset
Adjustment range / selection Factory setting
-15.0 ... +15.0 K 0.0 K
35