oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer page 14

5. Circulation:
Î Activate the circulation and select the circula-
tion mode.
For detailed information see page 22.
6. Afterheating:
Î Activate the store afterheating. Adjust the after-
heating mode, the reference sensor and the relay
that is to be switched.
For detailed information see page 24.
7. Thermal disinfection:
Î Activate the thermal disinfection. More adjust-
ments for this function can be made when the
commissioning menu has been completed.
For detailed information see page 25.
Note:
In order to use the thermal disinfection
function, the circulation function has to be
activated.
14
8. Completing the commissioning menu:
If the security enquiry is confi rmed, the adjustments
are saved.
Î In order to confi rm the security enquiry, select
Yes and press button ➄.
Î In order to get back to the parameters of the
commissioning menu, select No or press but-
ton ➆.
When the security enquiry has been confi rmed, the
controller is ready for operation.
All adjustments made in the commissioning menu
can, if necessary, be changed later on in the corre-
sponding menus.