Plugs And Pin-Outs; Wiring The Dc Power - Cisco IR1101 Hardware Installation Manual

Connecting the Router
Warning
This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations. Statement 1045

Plugs and Pin-Outs

The IR1101 ships with a DC power accessory kit.
The power entry receptacle is on the IR1101. The pin-outs are shown in the following figure.
Figure 42: Power Connector Pin-outs
Table 20: Power connector Descriptions
Pin Name Description
Number
1 DC In DC Power Positive Input
+
2 DC In - DC Power Return (GND-)
3 AC Alarm Common
4 AI Alarm Input

Wiring the DC Power

To connect the DC power on your Cisco IR1101, follow these steps:
IR1101 Industrial Integrated Services Router Hardware Installation Guide
Plugs and Pin-Outs
67