Ethernet Line Card Physical Dimensions; Transceiver Module Specifications; 40-Gigabit Qsfp And 100-Gigabit Qsfp28 - 38-Pin Connector Specifications - Cisco ASR 9000 Series Installation Manual

Ethernet Line Card Physical Dimensions

Description
2-Port 100G + 20-Port 10 GE Combination IPoDWDM Line Card with CFP2 and SFP+ (-TR)
Caution Be sure that the chassis configuration complies with the required power budgets. Failure to properly verify
the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales
representative for assistance.
Ethernet Line Card Physical Dimensions
For physical specifications, refer to the ASR 9000 Series line card data sheets:
https://www.cisco.com/c/en/us/products/routers/asr-9000-series-aggregation-services-routers/
datasheet-listing.html

Transceiver Module Specifications

For supported transceivers modules, refer to the Transceiver Module Group (TMG) Compatibility Matrix
Tool:
https://tmgmatrix.cisco.com/home
For transceiver module descriptions and specifications, refer to the data sheets:
Data Sheets

40-Gigabit QSFP and 100-Gigabit QSFP28 - 38-Pin Connector Specifications

Pin
1
2
3
4
5
6
7
8
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
150
Signal Pin Signal
GND 11 SCL
TX2n 12 SDA
TX2p 13 GND
GND 14 RX3p
TX4n 15 RX3n
TX4p 16 GND
GND 17 RX1p
ModSelL 18 RX1n
Power Consumption Values
520 W at 77°F (25°C)
560 W at 104°F (40°C)
600 W at 131°F (55°C)
Pin Signal Pin
21 RX2n 31
22 RX2p 32
23 GND 33
24 RX4n 34
25 RX4p 35
26 GND 36
27 ModPrsL 37
28 IntL 38
Technical Specifications
Signal
Reserved
GND
TX3p
TX3n
GND
TX1p
TX1n
GND