Table 5.1 Fans - Fujitsu GP 7000F Manual

CHAPTER 6 M600 Main Cabinet
Panel cover
Fans
Power supplies
70
The panel cover can be opened from its right side after unlocking it. Then you can access switches
on the operator panel, CD-ROM unit, Floppy drive unit, tape unit, and so on.
The Table 6.1 lists the fans installed in the M600 main cabinet.
Name Tray #
Fan #0 Tray #01
Fan #1
Fan #2
Fan #3 Tray #02
Fan #4
Fan #5
Fan #6 Tray #03
Fan #7
Fan #8
Fan #9
Fan #10 Tray #04
Fan #11
Fan #12
Fan #13 Tray #05
Fan #14 Tray #06
Fan #15 Tray #07
Fan #16
Fan #17 Tray #08
Fan #18
Fan #19 Tray #09
Fan #20
Fan #21 Tray #10
Fan #22
The M600 main cabinet has 2 kinds of power supply units as well as DDC (DC-DC Converter)
dedicated each processor module. FEP (Front End Bulk Power) unit has AC input, and provide
+45V(to PPU) and +5V(to SCF). PPU (Power Processing Unit) has +45V input, and provide +12V
or +5V or +3.3V or +2V to some internal components. The power supplies must be configured
according to the system hardware configuration as described in Table 6.2 .
Table 6.1 Fans
Location
Upper, Left (front view) of the cabinet
Upper, Right (front view) of the cabinet
Bottom, Left (front view) of the cabinet
Bottom, Right (front view) of the cabinet
Upper, Center Left-hand (front view) of the cabinet
Upper, Center Right-hand (front view) of the cabinet
Bottom, Left (rear view) of the cabinet
Bottom, Left (rear view) of the cabinet
Bottom, Right (rear view) of the cabinet
Bottom, Right (rear view) of the cabinet