Table 1.5 Connectors And Switches - Fujitsu GP 7000F Manual

Table 1.5 Connectors and Switches

Connector/ Marking
Switch
RS232C SERIAL A/B
KB KB
Parallel PARALLEL
10 Mb/100Mb LAN
Ethernet
UPS UPS
RCI RCI
PC PC
*
This type will not operate if connected improperly. However, it does not affect the
system performance.
The RS232C, Parallel and Ethernet interfaces use industry-standard connectors. Therefore, the user
can connect them to various peripheral devices. For the specifications of the RS232C, parallel
interface and UPS control interface, see 12 , "External Interfaces".
Table 1.6 shows other connectors and switches than the above:
Table 1.6
Connector/
Switch
SCF/switch No notation
SCF/RS232C No notation
IMPORTANT
The connector and switches in Table 1.6 are used only for the maintenance purpose by
trained service engineers. If used for any other reason the server will malfunction.
Type
Dsub/25 pin* The same connector as Parallel
8-pin DIN Connect a mouse via a keyboard
Dsub/25 pin* AT compatible
RJ45 10 Mb/100 Mb automatic recognition
Dsub/9 pin Connector to a UPS (Uninterruptable Power
Supply) which has the UPA interface.
RJ11 Install a terminating resistor
8-pin DIN For controlling power on for the main
cabinet
Connectors and Switches for Maintenance
Marking Type
Push pin
Dsub/9 pin
1.3 External Interface
Remarks
Remarks
Unavailable
Unavailable
9