Dat Unit - Fujitsu GP 7000F Manual

11.5 DAT Unit

This section describes the front panel indicators and buttons of the 4-mm DAT unit, and explains how to use the
DAT unit.
Setting in operating system
Setting an Internal DAT
Before using the DAT unit, the /kernel/drv/st.conf file must be modified. The modification is
described below.
1
Copy the original st.conf file as below.
# cp /kernel/drv/st.conf /kernel/drv/st.conf.old
2
Add the following to the /kernel/drv/st.conf file.
tape-config-list =
"HP
HP_data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;
IMPORTANT
The space between HP and C1537A must be 6 spaces. If the effective tape-config-list
has been defined, separate the above description with a "," and add it to the file like the
following example.
Tape-config-list =
"EXABYTE EXB-8505", "Exabyte 8mm EXB-8505", "EXBT-8SC",
"HP
EXBT-8SC = 1,0x35,0,0xce39,2,0x15,0x8c,1;
HP_data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;
3
Remove the contents of the /dev/rmt directory as follow.
# cd /dev/rmt
# rm *
4
Do a reconfigure boot as follow.
# cd /
# touch /reconfigure
# shutdown -y -i0
5
Then, make a reconfigure boot as follow.
ok boot -r
C1537A", "HP DDS3 4mm DAT", "HP_data2";
C1537A", "HP DDS3 4mm DAT", "HP_data2";
11.5 DAT Unit
129