Setup; What Is Setup; Using The Board Under Windows Using The Driver Library Api-Pac(W32); Using The Board Under Windows Using Software Other Than The Driver Library Api-Pac(W32) - Contec DIO-0808L-PCI User Manual

2. Setup

This chapter explains how to set up the board.

What is Setup?

Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware
The setup procedure varies with the OS and applications used.
Using the Board under Windows
Using the Driver Library API-PAC(W32)
This section describes the setup procedure to be performed before you can start developing application
programs for the board using the bundled DVD-ROM "Driver Library API-PAC(W32)".
Taking the following steps sets up the software and hardware. You can use the diagnosis program l ater
to check whether the software and hardware function normally.
Step 1 Installing the Software
Step 2 Setting the Hardware
Step 3 Installing the Hardware
Step 4 Initializing the Software
Step 5 Checking Operations with the Diagnosis Program
If Setup fails to be performed normally, see the "Setup Troubleshooting" section at the end of this
chapter.
Using the Board under Windows
Using Software Other than the Driver Library
API-PAC(W32)
For setting up software other than API-PAC(W32), refer to the manual for that software. See also the
following parts of this manual as required.
This chapter Step 2 Setting the Hardware
This chapter Step 3 Installing the Hardware
Chapter 3 External Connection
Chapter 6 About Hardware
DIO-0808L-PCI
2. Setup
9