Contec DIO-0808L-PCI User Manual page 27

2. Setup
(3) The property page for the device opens.
Enter the device name in the common settings tab page and then click [OK].
The device name you set here is used later when programming.
* The initial device name that appears is a default value. You can use this default name if you wish.
* Make sure that you do not use the same name for more than one device.
You have now finished installing the initial setting of Software.
20
* The name of the board
you have just added is
displayed.
- DIO-0808L-PCI
DIO-0808L-PCI