Contec DIO-0808L-PCI User Manual page 50

6. About Hardware
This chapter provides hardware specifications and hardware-related supplementary information.
Hardware specification
Table 6.1. Specification < 1 / 2 >
Item
Input
Input format
Number of input signal
channels
Input resistance
Input ON current
Input OFF current
Interrupt
Response time
Output
Output format
Number of output signal
channels
Output voltage
Output
rating
Output current
Residual voltage with
output on
Surge protector
Response time
*1 Data "0" and "1" correspond to the High and Low levels, respectively.
DIO-0808L-PCI
Opto-coupler isolated input
(Compatible with current sink output) (Negative logic *1)
8ch (all available for interrupts) (1 common in 8ch)
4.7k
2.0mA or more
0.16mA or less
8 interrupt input signals are arranged into a single output of interrupt signal INTA.
An interrupt is generated at the rising edge (HIGH-to-LOW transition) or
falling edge (LOW-to-HIGH transition).
Within 200sec
Opto-coupler isolated open collector output (current sink type) (Negative logic *1)
8ch (1 common)
35VDC (Max.)
100mA (par channel) (Max.)
0.5V or less (Output current50mA), 1.0V or less (Output current100mA)
Zener diode RD47FM(NEC) or equivalent to it
Within 200sec
Specification
6. About Hardware
43