Step 1 Installing The Software; Starting The Install Program - Contec DIO-0808L-PCI User Manual

Step 1 Installing the Software

This section describes how to install the Driver libraries.
Before installing the hardware on your PC, install the Driver libraries from the bundled API-PAC(W32)
DVD-ROM.
The following description assumes the operating system as Windows XP. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.

Starting the Install Program

(1) Load the DVD-ROM [API-PAC(W32)] on your PC.
(2) The API-PAC(W32) Installer window appears automatically.
If the panel does not appear, run (DVD-ROM drive letter):\AUTORUN.exe.
(3) Click on the [Install Development or Execution Environment] button.
* When using the Windows 8, 7, Vista, driver is automatically installed.
CAUTION
Before installing the software in Windows 8, 7, Vista, Server 2008, Server 2003, XP, and 2000, log
in as a user with administrator privileges.
DIO-0808L-PCI
2. Setup
11