Pit Status Register Block - Grundfos CIU 202 Functional Profile And User Manual

9.6 Pit status register block

Unless otherwise stated, the data type used for counters and
scaled values is always an unsigned integer.
Address Register name
Bit 0:
ResetAlarmAck
Bit 1:
ResetHistoryAck
Bit 2:
PitPump1ResetHistoryAck
Bit 3:
PitPump2ResetHistoryAck
Bit 4:
PitPump3ResetHistoryAck
00201
Bit 5:
PitPump4ResetHistoryAck
Bit 6:
PitPump1ResetAlarmAck
Bit 7:
PitPump2ResetAlarmAck
Bit 8:
PitPump3ResetAlarmAck
Bit 9:
PitPump4ResetAlarmAck
Scale Description
Indicates if a ResetAlarm control bit is acknowledged by the device.
This bit is only active if AutoAckControlBits (register 00005, bit 0) is set
Bool to "0".
0:: Not acknowledged
1: Acknowledged.
Indicates if a ResetHistory control bit is acknowledged by the device.
This bit is only active if AutoAckControlBits (register 00005, bit 0) is set
Bool to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump1ResetHistory control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump2ResetHistory control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump3ResetHistory control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump4ResetHistory control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump1ResetAlarm control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump2ResetAlarm control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump3ResetAlarm control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
Bool 0) is set to "0".
0: Not acknowledged
1: Acknowledged.
Indicates if a PitPump4ResetAlarm control bit is acknowledged by the
device. This bit is only active if AutoAckControlBits (register 00005, bit
0) is set to "0".
Bool
0: Not acknowledged
1: Acknowledged.
Register continues on next page
23