Cim Status Register Block; Cellular Network Real Time Clock - Grundfos CIU 202 Functional Profile And User Manual

9.3 CIM status register block

Registers in this block can be read by means of function codes
0x03 and/or 0x04. They are read-only. Use this block for various
kinds of fault finding.
Address Register name
00021 GENIbusCRCErrorCnt
00022 GENIbusDataErrorCnt
00023 VersionNumber
00024 ActualModbusAddress
00025 GENIbusTXcountHI
00026 GENIbusTXcountLO
00027 GENIbusRXcountHI
00028 GENIbusRXcountLO
GeneralStatus
Bit 0: ScadaPinCodeEnabled
00029
GeneralStatus
Bit 1: WriteAccess
00030 UnitFamily
00031 UnitType
00032 UnitVersion
00033 BatteryState
00034 ProductSoftwareVersionHI
00035 ProductSoftwareVersionLO
00036 ProductSoftwareDayMonth
00037 ProductSoftwareYear

9.4 Cellular network real time clock

Address Register name
00080 SetUNIXRealTimeClockHI
00081 SetUNIXRealTimeClockLO
00082 SetRtcSecond
00083 SetRtcMinute
00084 SetRtcHour
00085 SetRtcDay
00086 SetRtcMonth
00087 SetRtcYear
00088 Bit 0: SetRtc
00089 StatusUNIXRealTimeClockHI
00090 StatusUNIXRealTimeClockLO
00091 StatusRtcSecond
00092 StatusRtcMinute
00093 StatusRtcHour
00094 StatusRtcDay
00095 StatusRtcMonth
00096 StatusRtcYear
00097 Bit 0: StatusSetRTCAck
Description
Holds a CRC error counter for the GENIbus connection to the product.
Holds a data error counter for the GENIbus connection to the product.
A Grundfos-specific version number. This is an unsigned integer value.
Holds the current Modbus slave address of the device.
Valid value range: 1...247.
Holds a transmit counter for the total number of telegrams sent to the
product on the GENIbus connection.
Holds a receive counter for the total number of telegrams received from the
product on the GENIbus connection.
PIN code functionality.
0: No PIN code required
1: PIN code required to perform remote control and configuration.
Activation of SCADA PIN code protection takes place via the SMS
command "SCADACODE". See "CIM 260 SMS commands" which you can
download from Grundfos Product Center.
Remote write access.
0: No write access, the PIN code is incorrect.
1: Full write access, the PIN code is either correct or not enabled.
Grundfos product family.
Grundfos product type.
Grundfos product version.
State of battery
0: Battery not present
1: Battery must be replaced
2: Battery charging
3: Battery needs charging, but temperature too high
4: Battery needs charging, but temperature too low
5: Battery low
6: Battery OK
255: Battery state not available
Product software version (BCD diget 1-4 aa.bb)
Product software version (BCD diget 5-8 cc.dd)
Product software date (BCD ddmm)
Product software date (BCD yyyy)
Description
Set real time clock (32 bit UNIX format)
Triggered on value change
Set real time clock - seconds
Set real time clock - minutes
Set real time clock - hours
Set real time clock - day
Set real time clock - month
Set real time clock - year
Triggers setting of real time clock - s/m/h/d/m/y format
Real time clock (32 bit UNIX format)
Real time clock - seconds
Real time clock - minutes
Real time clock - hours
Real time clock - day of month
Real time clock - month
Real time clock - year (after 2000)
Acknowledge of set RTC command
CIM CIM CIM
200 260 500
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
- ● -
● ● ●
● ● ●
● ● ●
- ● -
● ● ●
● ● ●
● ● ●
● ● ●
CIM CIM CIM
200 260 500
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
- ● -
19