Warning Label; Safety Precautions - Casio DT-X400 Series User Manual

Warning Label

• This label is a warning and caution label for Class 2 laser products that comply with
IEC60825-1:2014.
• Although Class 2 laser light is only emitted momentarily, never look directly into the
beam light.
• The laser light emitted by this laser scanner has a maximum output of less than 1 mW
and a wavelength of 650 nm.
• Use of controls or adjustments or performance of procedures other than those specifi ed
herein may result in hazardous radiation exposure.
• Toute manipulation a l'aide de procedures autres que celles specifi ees dans ce Mode
d'emploi est dangereuse et doit etre evitee.

Safety Precautions

Congratulations upon your selection of this CASIO product. Be sure to read the following
Safety Precautions before trying to use it for the fi rst time.
Your neglect or avoidance of the warning and caution statements in the subsequent
pages causes the danger of fi re, electric shock, malfunction and damage on the
goods as well as personal injury.
Markings and Symbols
The following are the meanings of the markings and symbols used in these Safety
Precautions.
Danger
Warning
Caution
• A diagonal line indicates something you should not do. The symbol shown here indicates you
should not try to take the unit apart.
• A black circle indicates something you should do. The symbol shown here indicates you
should unplug the unit from the wall outlet.
This symbol indicates information that, if ignored or applied incorrectly, creates
the danger of death or serious personal injury.
This symbol indicates information that, if ignored or applied incorrectly, creates
the possibility of death or serious personal injury.
This symbol indicates information that, if ignored or applied incorrectly, creates
the possibility of personal injury or property damage.
E-3