Ethernet Cradle (Ha-S62Io - Casio DT-X400 Series User Manual

Ethernet Cradle (HA-S62IO)

The optional Ethernet Cradle (HA-S62IO) makes it possible to transmit fi le data between
DT-X400 and a PC via a USB or LAN connection (download or upload). You can also use
the Ethernet Cradle to charge the battery pack installed in DT-X400.
Part Names and Operation
<Top>
6
7
8
1 AC Adaptor Jack
2 LAN Port
3 USB Host Port
4 USB Client Port
5 Selector Switch
Charging Status LED
6
(Battery Pack)
Power Supply/Data
7
Communication Terminal
8 Power Supply LED
9 Battery Pack Contacts
E-46
9
Used to connect an AC adapter as a power supply.
Used to connect and transfer data to a computer or hub via a LAN cable
for data transfer.
Used to connect a corresponding USB peripheral device.
Used to connect to a computer.
Used to switch between a USB connection and a LAN connection.
LAN: LAN
A: USB host
B: USB client
Shows the charging status.
Red: Charging
Green: Charging complete
Flashing alternately red/green: Battery pack fault or outside charging
temperature range
Used to supply power to the DT-X400 or for data communication.
Indicates the power status and the mounting status of the DT-X400.
Red: Power on, DT-X400 is not installed.
Green: Power on, DT-X400 mounted correctly.
Used to charge the battery pack.
<Left>
5
<Back>
1 2 3 4