Casio DT-X400 Series User Manual page 16

1 Speaker
2 Charging Status LED
3 Notifi cation LED
Illuminance/
4
Proximity Sensor
5 Screen (Touch Panel)
6 Microphone
7 Center Trigger Key
8 Power Key
9 Function Key
10 Cursor Key
11 CLR Key
12 Enter Key
13 Numeric Keys
14 Fn Key
15 SP Key
16 Volume Down Key
17 Volume Up Key
18 Mode Key
19 Strap Holes
20 USB Type-C Port
21 L Trigger Key
22 R Trigger Key
23 Barcode Reader
24 NFC Reader
25 Camera
26 LED Light
27 Microphone
28 Hand Belt Mount
29 Rear Trigger Key
E-14
Outputs alarm tones and other sounds.
Show charging status
Show notifi cations
Measure brightness and proximity of object
The screen displays texts, operations, indicators and so forth. In
addition, operations can be performed and data can be input on
the screen using stylus.
Microphone
Scan barcode
Able to set an optional function
Power down/power on DT-X400
Used when starting a pre-registered application.
Perform the same functions as the up and down arrow keys on a
PC keyboard.
Used to clear one letter to the left of the cursor.
Press when fi nishing entering numerical values or when moving
to the next step.
Used to enter numeric values and decimal points.
Used to make various settings in combination with the function
keys or numeric keys or when starting a pre-registered
application.
Enters a space. Can also be assigned any function.
Volume down
Volume up
The key switches the character input mode, either characters in
lowercase letter or characters in uppercase letter.
Attach strap
Connects the optional USB Type-C cable for USB communication.
Scan barcode
Able to set an optional function
Scan barcode
Able to set an optional function
Laser or LED light of 2D imager radiates to read barcode
Reading NFC card
Take picture and movie
Torch around and camera fl ash
Uses Noise Canceling.
Used to attach the hand belt.
Scan barcode
Able to set an optional function