Section 15: Accessory Connections - HySecurity Nice 7251 Slide Installation And Programming Manual

SECTION 15:
This section describes the accessory functions, connections, and wiring for the 1050 control board. See FIGURE
15-1 (below) for a visual representation of all the accessory inputs and outputs, and the following pages for a
description of I/O functions and pin designations.
SOLAR
PANEL
Polarity
LEDs
Solar
Battery
Main DC
Fuse 30A
(Spare)
Fuse 5A
(Spare)
Aux. Output 1
(Max. 5A, 35V)
Aux. Output 2
(Max. 5A, 35V)
Magnetic Lock
(~30 VDC, 1.8A)
Same V+ output as
highest V+ input
Lamp Control
(~30 VDC, 1.8A)
Alarm Control
(12 VDC, 0.5A)
GROUND LUG
FIGURE 15-1: 1050 CONTROL BOARD ACCESSORY CONNECTIONS
MX4514 Rev. A ©2019
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
ACCESSORY CONNECTIONS
POWER
SUPPLY
12-32
VDC
FUSE 30A
Loop 2
(Entrap)
UL/Edge
Motor 1 IN Motor 2 IN
Guard External
Station Receiver
Input
LED, Encoder
Activity, MOTOR 2
LED, Encoder
Activity, MOTOR 1
LED, Open/Close
Limit, MOTOR 2
Power - MOTOR 2
LED, Open/Close
Limit, MOTOR 1
Power - MOTOR 1
Oview Conn.
(4 Pin, RJ11)
BlueBus
LED, BlueBus
Voltage Activity
OXI/A Plugin
Radio Receiver
Signal
External Antenna
for Plugin Receiver
Signal
www.hysecurity.com • 800-321-9947
61